Antenna roof mount – Your roof TV antenna captures TV signals traveling through the air. The antenna then delivers the signal to your TV so you can watch your favorite programs and sporting events. One of the best ways to enjoy a strong, over-the-air television signal is with a roof TV antenna.
Find the location of the television towers in your area. Determine the location of your roof where you mount the TV antenna roof mount. Fold your tripod mount and loosening the pipe support bolts. Insert the antenna tube into the base, then tighten the tube support bolts. Note when the tripod legs hit the roof and slide a stud finder of shingles in the area to locate the center of the rafters. Mark each rafter with a piece of chalk, then place each tripod leg over the chalk mark.
12 Photos Gallery of: How To Install TV Antenna Roof Mount
Apply a roof sealing pad to the bottom of each tripod leg, then place the seal plate directly over your chalk marks on the center of the beam. Place a level against the mast tube, then level the tripod with each leg sits on the chalk markings. Press on each leg to the ceiling so the sealing pad stuck shingles. Drill holes in the ceiling joist where the two outer holes of the tripod leg platform. Direct the antenna roof mount properly.